Publicidad
Air Flow (if equipped)
Turn the left air valve dial to active the left air valves.
Turn the right air valve dial to activate the right air
valves.
The amount of air induced into the whirlpool jets can be
controlled from maximum to none.
Controlling Whirlpool Direction and Flow
Direction -
All Jacuzzi jets, except the rotating neck jets, can be driectionally
adjusted. To change the direction of the water flow, swivel the jet
nozzle to the desired angle. The jets can be directed individually
toward any location on your body to provide a hydromassage.
The jets can also be adjusted so that they all point in the same
direction (clockwise or counterclockwise) to circulate the water in
a circular motion around the bath, causing a total whirlpool effect.
Water Force -
Most Jacuzzi jets are designed for flow adjustment. For robust
action, increase the force of the flow by rotating the nozzle, or
face, to the left (counterclockwise). For a more gentle effect, or to
close off the jet, rotate the nozzle, or face, to the right (clockwise).
Closing one or more jets can increase the water force in the
remaining jets.
The rotating neck jets, and some AccuPro™ jets, cannot be
adjusted for water force.
Never run the whirlpool system with all the jets closed.
Page 18
All manuals and user guides at all-guides.com
Turn the dial clockwise to reduce the air
flow
www.jacuzzi.com
Comfort Whirlpool Bath
Turn the dial counter-clockwise to increase the
air flowclockwise to reduce the air flow
Figure 20
Multidirectional Jets
Figure 21
Installation and Operation
Publicidad
