Descargar Imprimir esta página

Grizzly Tools ERM 1641 GT Traduccion Del Manual De Instrucciones Originale página 73

Cortacésped eléctrico

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 117
Do not use hard or pointed objects, as
these may damage the blade.
Oil the wheels from time to time.
Before each use, check the lawnmow-
er for obvious defects such as loose,
worn or damaged parts. Check that
all nuts, bolts and screws are sitting
firmly.
Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.
Changing the Blade
Switch off the equipment before all
maintenance and cleaning work,
disconnect the plug and wait until
the blade stops.
If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade
is damaged or showing signs of imbal-
ance, it must be replaced (see chapter on
"Spare Parts").
1. Turn the equipment over.
2. Use sturdy gloves and hold the blade
firmly (23). Turn the blade screw (24)
anticlockwise off of the motor spindle
using a screwdriver.
3. Install the new blade in the reverse
order. Ensure that the blade is posi-
tioned correctly and the screw tight-
ened firmly.
Storage
In order for the device takes up
less space, loosen the two star
knob nuts (3) at the bow-type han-
dle (1) and remove the two star
knob nuts and screws (
Keep the equipment dry and out of
reach of children.
Allow the motor to cool before storing
the equipment in a confined space.
Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal and envi-
ronmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling
centre when you have finished with
them.
The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
Defective units returned to us will be
6) on
disposed of for free.
the lower bar (4). Now the bow-
type handle (1) and the lower bar
(4) can be collapsed together.
Make sure that the cable is not
clamped.
Machines do not belong with do-
mestic waste.
GB
73

Publicidad

loading