Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Technical data
Electric Scarifier/
Aerator 2in1 ...................... DG-ESA 1536
Motor input .................................... 1500 W
Rated voltage ..................... 230 V~, 50 Hz
Protection Class ..
Degree of protection ...........................IPX4
Rotating speed of the tool
(n
) ............................. 3600 min
o
Cylinder width ...................................36 cm
Depth adjustment .............................5-way
............. (3/6/9/12 mm + transport position)
Volume collection bag ..........................40 l
Weight (incl. accessories) .................13 kg
Acoustic pressure level
) ........................ 82 dB (A); K
(L
pA
Sound power level (L
Measured ...... 95.5 dB (A); K
Guaranteed .............................97 dB (A)
Vibration (a
) ............. 3.3 m/s
n
The noise and vibration values were es-
tablished by the standards and stipulations
listed in the Conformity Declaration.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, including,
26
II (Double insulation)
-1
(r.p.m)
= 3 dB
pA
)
WA
= 1.92 dB
WA
; K= 1.7 m/s
2
for example, times during which the
power tool is turned off and times
when the tool is turned on but is run-
ning idle).
Safety precautions
This section covers the basic
safety instructions when working
with this implement.
Symbols used in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols with
information on preventing
damage.
2
Pull out the mains plug.
Wear gloves when handling
the roller.
Help symbols with informa-
tion on improving tool han-
dling.
Symbols on the implement
Caution!
These Instructions must
be read.
Danger of injury due to
flung-out material! Keep
bystanders well away from
the implement.
Publicidad
