Publicidad
Idiomas disponibles
Idiomas disponibles
GB
•
The implement can be operated with
or without the collection bag.
We recommend working with the col-
lection bag for aeration. We recom-
mend working without the collection
bag for scarifying.
•
Mow the lawn to the required grass
height.
•
Do not use the scarifier in long grass.
It may otherwise wind around the
scarifier blade and result in damage to
the equipment.
•
Select the appropriate working or
readjustment position (in the event of
cylinder wear) so that the implement is
not overloaded.
•
Commence work in the vicinity of the
power socket and proceed away from
the socket.
•
Always ensure that the extension cable
is behind you, and after turning move
it to the side that has already been
treated.
•
Guide the implement at a walking
pace down lanes that are as straight
as possible. To ensure uninterrupted
aerating or verticuting the individual
lanes should always overlap by a few
centimetres. Dwelling too long at the
same place while the implement is
running can damage the grass sward.
•
To ensure that the extension cable is
not an impediment, turn the implement
in such a manner that the cable strain
release on the bar always faces the
side that has been treated.
•
Always clean the implement after each
use (see "Cleaning/Maintenance").
•
After having treated lawns with dense
moss growth, it is advisable to reseed
the lawn so that it can regenerate it-
self quicker.
36
Transport
•
Adjust the transport position (+10
mm) setting (see "Setting the Working
Position") when transporting the imple-
ment.
•
Lift the implement to transport it over
steps and sensitive surfaces (e.g.
tiles). Use the handle (
Cleaning/maintenance
Work that has not been de-
scribed in these Instructions
must be carried out by a servic-
ing agency authorised by us.
Only use original parts.
Wear gloves when handling the
cylinder.
Prior to all maintenance and clean-
ing work always switch off the imple-
ment, disconnect the plug from the
power socket and wait until the cylin-
der is standing still. Warning! Risk of
injury by dangerous moving parts!
General cleaning and
maintenance work
Do not jet water onto the imple-
ment and do not clean it under
flowing water. This would result in
the danger of an electric shock and
the implement could be damaged.
•
When work has finished remove plant
residues adhering to the wheels, inside
the ventilation opening, the grass ejec-
tor opening and the cylinder. Do not use
hard or pointed objects for this purpose
as they could damage the implement.
•
Completely empty the collection bag.
9).
Publicidad
