Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6.6
Setting the operating mode and power level
Operating mode
HBS x-touch 300 has three different operating
modes for monopolar cutting, four for monopolaar
coagulation and three for bipolar coagulation
applications (for details, see chapter 3.2 "Overview
of symbols for operating modes and settings"). The
selection of all modes takes place according to the
same principle. Touch the field showing the
operating modes. The selection menu then opens.
The required operating modes must be selected by
touching. To save and return to the main menu,
select the "Exit" field.
Power setting
To set the required power level, touch the power display. The menu for power level selection appears.
Menu example: Power setting
(MONO1- COAG)
When the unit is next switched on, the last used settings will appear. If you want to save individual
settings against changes the lock function can be used. For more information about the lock function
see chapter 6.7and 6.8.
44
Menu example: Selection of operating modes
(MONO2 – CUT)
Use the arrow keys in order to set the required power
setting.
To save and return to the main menu, select the "Exit"
field.
HBS x-touch 300
Publicidad
