Stihl RMI 422 PC-LF Manual De Instrucciones página 76

English
Message
2032 – Battery
temperature
Outside temperature
range
2040 – Battery
temperature
Outside temperature
range
2050 – Adapt mowing
plan
Extend active times
2060 – Mowing
completed
Press OK to release
2070 – GPS signal
No reception at edge
2071 – GPS signal
No reception at starting
pt. 1
2072 – GPS signal
No reception at starting
pt. 2
2073 – GPS signal
No reception at starting
pt. 3
2074 – GPS signal
No reception at starting
pt. 4
2075 – GPS signal
No reception in desired
zone
74
Possible Cause
Temperature in battery during charging too low
or too high.
Temperature in battery when starting mowing
operation too low or too high.
Active times have been shortened/deleted or
the mowing duration has been extended – the
stored active times are insufficient for the
necessary mowing operations.
Mowing in secondary area successfully
completed.
No GPS reception.
No GPS reception.
No GPS reception.
No GPS reception.
No GPS reception.
No GPS reception.
22 Troubleshooting Guide
Remedy
► Allow the robotic mower to warm up or cool
down.
► Allow the robotic mower to warm up or cool
down.
► Extend the active times or shorten the
mowing duration.
► Return the robotic mower to the mowing area
and dock to charge the battery.
► Repeat edge testing, @ 15.3.
► If the problem persists, have wire routing
checked by an authorized STIHL iMow
servicing dealer.
► Change the position of starting point 1,
@ 15.6.
► Change the position of starting point 2,
@ 15.6.
► Change the position of starting point 3,
@ 15.6.
► Change the position of starting point 4,
@ 15.6.
► Redefine the desired zone in the iMow App.
Make sure that the desired zone and
perimeter wire overlap.
0478-131-3050-A