Paper Drawers
This section describes how to load paper into the paper drawers.
NOTE
•
The following paper sizes can be loaded in Paper Drawers 1, 2, 3, and 4:
- A4, A4R, A3, or A5
•
Paper Drawer 2 can be added by attaching the optional Cassette Feeding Module-J1 or
3
-K1.
•
Paper Drawer 3 (and 4) can be added by attaching the optional Cassette Feeding
Module-K1.
•
For more information on available paper stock which can be loaded in the paper drawers,
see "Available Paper Stock," on p. 5-3.
Loading Paper
A message prompting you to load paper appears on the LCD display, and the error
indicator flashes red when:
•
paper runs out in any of the paper drawers.
•
a paper drawer is not fully inserted into the machine. Make sure that the paper
drawer is properly set in place.
•
a paper drawer is opened even if the paper is loaded.
Load paper
100%
Density: Auto
ImgQual.: Text
2-Sided: Off
IMPORTANT
•
Do not load nonstandard paper sizes into the paper drawers.
•
Do not load the following types of paper into the paper drawers, as this may cause paper
jams:
- Severely curled or wrinkled paper
- Lightweight straw paper: less than approximately 64 g/m
- Transparencies
- Envelopes
- Labels
3-2
Paper Drawers
A4
CAUTION
Take care not to cut your hands on the
edges of the paper when loading it into
the machine.
2