Cameo PIXBAR Serie Manual De Usuario página 21

This will take you to the submenu for configuring the submenu items (see table). The settings for
each loop are made separately and are retained even after restarting the device.
EZ REMOTE CONTROL VIA CAMEO UNICON (optionally available)
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN you
now select the EZ Remote menu item and confirm by pressing ENTER. Now set the desired
fixture ID (Fixture ID 1 - 8) and confirm the entry. Connect the spotlight and UNICON using a DMX
cable, select DMX Control in the UNICON menu, then EZ Remote, and enter the same unit ID.
Now control the spotlight using RGB, GEL, CCT or HSI. By assigning different unit IDs, up to eight
spotlights (or spotlight groups) can be controlled separately via UNICON.
Step selection
Setting the step duration for the
selected step
Setting the fade time for the
selected step
Selecting the colour preset or
blackout for the selected step
Select the colour preset or
blackout or skip the selected
step
21