Cameo PIXBAR Serie Manual De Usuario página 29

VERTICAL HANGING MOUNTING ON A TRUSS
For vertical hanging mounting, up to three
PIXBAR® G2 may be connected to each
other. The following optionally available
products must be used for this:
1 A suitable truss clamp with sufficient
load-bearing capacity for the total load
(e.g. half coupler).
2 One Omega Bracket (item number CLO-
MEGABRACKET1).
3
One stop set (item number CLPBG2VER-
TIMOUNT).
4
One or two connecting elements are
needed to connect two or three PIX-
BAR® G2 and to secure the connection
(item number CLPBG2STACKKIT).
The safety eyelet of the top foot of the top
bar serves as a safety point. Make sure that
the safety rope used to secure the bars is
suitable for the total weight of the bars.
For optical reasons, the mounting feet can
be folded to the side of the housing. A rub-
ber buffer prevents the surface from being
damaged.
1
2
3
4
29