Cameo PIXBAR Serie Manual De Usuario página 23

SYSTEM SETTINGS (Settings)
Starting from the main display, press MENU to enter the main menu. Using the UP und DOWN
buttons you now select the menu item Settings and confirm with ENTER.
This will take you to the submenu for setting the submenu items (see table, select with UP and
DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER).
Wireless
=
settings
Display
=
settings
Activate W-DMX
W-DMX deactivated
W-DMX mode: Receiver
G3 (G3 transmission standard)
G4s (transmission standard G4s )
Uncouple all units and make them ready
for coupling
Pair with W-DMX devices. W-DMX must
be enabled on all devices, and the pairing
with a transmitter be retained (Receive
Reset).
Send incoming signal to XLR connector
Using the incoming signal from the XLR
connector when the W-DMX signal is lost.
No connection between W-DMX signal and
XLR connectors
Display is rotated by 180° (e.g. for over-
head installation)
No display rotation
Display lighting permanently on
Deactivation of the display lighting after
approx. 20 seconds of inactivity
Function disabled
The controls and display are locked after
approx. 60 seconds without any operation.
Unlock: Press UP and DOWN simultane-
ously for approx. 5 seconds
23