Handpiece
Before you insert the light probe, remove the protective foil
on the corresponding opening of the handpiece.
Slightly turn the light probe while attaching it to the hand-
piece.
After that, mount the anti-glare shield on the light probe.
Battery
We recommend fully charging the battery before the first
use.
Slide the battery straight into the handpiece until you hear
and feel it click into place.
Gently place the handpiece in the corresponding cradle in
the charging base. If a sleeve is used, please remove it
before you charge the battery. If the battery is fully
charged, it features a curing capacity of approximately 45
minutes.
Tip
If possible, use the light always with a fully charged bat-
tery. This will prolong its service life. It is therefore recom-
mended to place the handpiece into the charging base after
each appointment. The charging time for empty batteries is 2
hours.
11