BRAND Transferpette-8 electronic Instruccionesde Manejo página 45

What to do
6.
Discharge liquid
7.
Start blow-out?
Start blow-out manually
The blow-out function can, if necessary, be initiated manually
at any time.
1.
Bring up the
blow-out function
2.
Start blow-out
Note:
To accomplish the blow-out, the pistons move to the lowest position. The user must be certain that any
residual liquid is discharged safely.
If the pipetting key is pressed and held, the pistons will be maintained at their lowest position
to avert an accidental aspiration of liquid. When the key is released, the pistons return to the
start position.
How to do it
Press the pipetting key
once to discharge the liquid.
The arrow in the display
points downwards
(discharge).
No action required!
When pipetting in the
PIP mode the blow-out
function is performed
automatically.
Press the ENTER key.
The display shows 'blo'
for blow-out.
Press the pipetting key
once to initiate the blow-
out process. The display
moves back to the start
position of the selected
pipetting mode.
Keys to press Display readout
1x
1x
1x
PIP Mode
4 5