BRAND Transferpette-8 electronic Instruccionesde Manejo página 49

What to do
7.
Repeat aspiration
of liquid in revPIP
mode
8.
Initiate blow-out
9.
End pipetting
How to do it
Press the pipetting key
again and the set volume
is aspirated into the tips.
Press the pipetting key
again and the volume is
discharged again, and so
on...
Press the ENTER key after
the last pipetting operation.
The display shows 'blo' for
blow-out.
Press the pipetting key
once to initiate the blow-
out process. The residual
liquid is discharged.
After the residual liquid is
discharged (blow-out), the
display moves back to the
start position.
Keys to press Display readout
1x
1x
1x
revPIPMode
4 9