BRAND Transferpette-8 electronic Instruccionesde Manejo página 53

What to do
7.
Set the number
of steps
8.
Confirm the
number of steps
9.
Aspirate
liquid
10.
Dispense
liquid
11.
Initiate blow-out
12.
End dispensing
How to do it
Press the arrow keys (+/-)
to set the number of steps.
'Steps' continues to blink.
Press the ENTER key.
The display now shows the
number of steps that has
been set.
Press the pipetting key
once to aspirate the liquid.
Each time the pipetting key
is pressed one dispensing
step is performed. The
arrow in the display points
downwards (discharge). The
display shows the number of
dispensing steps left.
Press the ENTER key after
the last dispensing step.
The display shows 'blo'
for blow-out. Press the
pipetting key next once
to initiate the blow-out
process (see also p. 51).
After the residual liquid is
discharged (blow-out), the
display moves back to the
start position.
Keys to press Display readout
+
–
1x
1x
1x
1x
DISP Mode
5 3