Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING DATE/TIME
IT IS NECESSARY TO SET THE DATE AND TIME FOR THE UNIT
EVERY TIME BATTERIES ARE INITIALLY INSTALLED OR REPLACED.
The date/time feature is on the bottom left of the
display screen. This unit stores the date and time,
including year.
1. When the batteries are first installed, the
device will automatically prompt you to set
the Date/Time feature as indicated by the
flashing YEAR on the display.*
2. Press the MEM button to advance the display
to the desired year, press SET to confirm the
year.
3. Next, the month will blink on the lower left of
the display. Repeat step 2 to set the Month,
Date, Hours, then Minutes.
4. After setting the minutes, the unit will
automatically exit out of the Date/Time setting
mode and briefly scroll through the Date/Time
before shutting off.
*NOTE: If the batteries have already been
installed—when the unit is off (a blank display
screen), press and hold the SET button. After
5-seconds, the year will begin to flash; follow the
steps above to set the date and time.
Year
Month
Date
Hour
Minutes
ENGLISH • 11
Publicidad
