Cherubini WAVE LOCK RX Instrucciones página 33

To set the closing position, hold pressed the "stop" button (around 2 sec) until the motor
performs a short "down" movement.
Tn: Already programmed remote control
A
?
C
Tn
• Put the Pergola at its "lowest coupling limit" position (fig. 1).
• Press button B (stop) for about 2 seconds, until the motor lifts the fabric into its
coupling position (fig. 2).
• Press button C key (down) to put the fabric on position "lowest uncoupling limit"
(fig. 3).
• Press the B button (stop) for about 2 seconds, until the motor lifts the fabric and ends
the uncoupling movement (fig. 4).
• From now to move the motor, just press either the up or down buttons briefly.
1
Fig. 1
2
C
Fig. 3
1
2
C
salita
SETTING THE OPENING LIMIT SWITCH
1
2
3
B
1
2
3
B
Tn (2 sec)
Fig. 2
3
Tn (2 sec)
Fig. 4
3
B
Tn (2 sec)
33
1
Pergola closed
Lowest coupling
2
limit
Coupling
Lowest uncoupling
3
limit