Cherubini WAVE LOCK RX Instrucciones página 34

DELETING THE LIMIT SWITCH POSITIONS
To delete only the closing limit switch perform the following steps and proceed with
"SETTING THE CLOSING LIMIT SWITCH".
Tn: Already programmed remote control
+
B C
Tn
To delete only the opening limit switch positions and the relevant coupling and
uncoupling positions, use the procedure below:
a - Put the awning to its half-way point
b - Perform the command sequence
Tn: Already programmed remote control
+
B C
Tn
c - Perform the "SETTING THE OPENING LIMIT SWITCH".
To delete all limit switch and coupling and uncoupling positions, use the procedure below:
a - Put the awning to its half-way point
b - Perform the command sequence
Tn: Already programmed remote control
+
B C
Tn
c - Now, new limit switch positions may be set (see page 32).
DELETING THE CLOSING LIMIT SWITCH
+
B
DELETING THE OPENING LIMIT SWITCH
+
B
TOTAL DELETING OF THE LIMIT SWITCHES
+
B
C
Tn
C
Tn
C
Tn
34
+
A B
Tn (2 sec)
C
Tn (2 sec)
+
B C
Tn (4 sec)