Receiving And Storage - WEG CFW500 Serie Manual Del Usuario

CALL NOW 800-985-6929
identification of the most important characteristics of the inverter even in inverters mounted
side-by-side. For further details about the position of the labels, see
Production order
Rated input data
(voltage, current

2.5 RECEIVING AND STORAGE

The CFW500 is supplied packed in a cardboard box. On this package, there is an identification
label which is the same as the one attached to the side of the inverter.
Check if:
The identification of the CFW500 matches the model purchased.
„
Any damages occurred during transportation.
„
Report any damage immediately to the carrier.
If the CFW500 is not installed soon, store it in a clean and dry location (temperature between
-25 °C and 60 °C (-77 ºF and 140 ºF)), with a cover to prevent dust accumulation inside it.
CALL NOW 800-985-6929
http://www.automatedpt.com
Serial number
and frequency)
Stock item
Serial number
Front Label of the CFW500 (Under the Plug-In Module)
Figure 2.3: Description of the identification labels on the CFW500
http://www.automatedpt.com
Side Label of the CFW500
Email: charles@automatedpt.com
General Information
Figure A.2 on page 139.
Model (Smart code
of the inverter)
Manufacturing date
WEG stock item
Rated input data
(voltage, current
and frequency)
Model (Smart code
of the Inverter)
Manufacturing date
CFW500 | 9
Email: charles@automatedpt.com