WEG CFW500 Serie Manual Del Usuario página 46

CALL NOW 800-985-6929
OUTPUTS
COMMUNICATION
SAFETY
HUMAN-
MACHINE
INTERFACE
(HMI)
ENCLOSURE
(*) The number and/or type of analog/digital inputs/outputs may vary. Depending on the Plug-in module (accessory) used.
For the table above, it was considered the standard plug-in module. For further information, refer to the programming
manual and the guide supplied with the optional item or in the CD-ROM.
(**) The maximum capacity of 150 mA must be considered adding the load of the 24-V power supply and transistor output,
that is, the sum of the consumption of both must not exceed 150 mA.
CALL NOW 800-985-6929
http://www.automatedpt.com
RELAY
(*)
TRANSISTOR
POWER SUPPLY
INTERFACE
RS-485
PROTECTION
STANDARD HMI
IP20
NEMA1/IP20
http://www.automatedpt.com
1 relay with NA/NF contact.
„
Maximum voltage: 240 Vac.
„
Maximum current: 0.5 A.
„
Programmable functions.
„
1 insulated digital output open sink (uses as reference the 24-Vdc
„
power supply).
Maximum current 150 mA
„
power supply.
Programmable functions.
„
24-Vdc -15 % + 20 % power supply. Maximum capacity: 150 mA
„
10-Vdc power supply. Maximum capacity: 2 mA.
„
Insulated RS-485.
„
Modbus-RTU protocol with maximum communication of
„
38.4 kbps.
Overcurrent/phase-phase short circuit in the output.
„
Overcurrent/phase-ground short circuit in the output.
„
Under/overvoltage.
„
Overtemperature in the heatsink.
„
Overload in the motor.
„
Overload in the power module (IGBTs).
„
External alarm / fault.
„
Setting error.
„
9 keys: Start/Stop, Up arrow, Down arrow, Direction of Rotation,
„
Jog, Local/Remote, BACK/ESC and ENTER/MENU.
LCD display.
„
View/edition of all parameters.
„
Indication accuracy:
„
- current: 5 % of the rated current.
- speed resolution: 0.1 Hz.
Models of frame A, B and C.
„
Models of frame A, B and C with kit NEMA1.
„
Email: charles@automatedpt.com
Technical Specifications
(maximum capacity of the 24-Vdc)
(**)
CFW500 | 41
Email: charles@automatedpt.com
.
(**)