WEG CFW500 Serie Manual Del Usuario página 3

CALL NOW 800-985-6929
Summary of Reviews
The information below describes the reviews made in this manual.
Review
00
01
02
03
04
05
NOTE!
The inverters CFW500 have the default parameters set as described below:
„
„
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the default frequency
(check P0403), it is necessary to set:
„
„
It is only necessary to set these parameters once.
Refer to the programming manual of the CFW500 for further details about the
setting of parameter P0204.
CALL NOW 800-985-6929
http://www.automatedpt.com
General review and inclusion of the new models.
Modification in Table B.3 on page 145
General review and inclusion of frame D.
General review and inclusion of frame C 500 / 600 V.
60 Hz for models without internal filter.
50 HZ for models with internal filter (check the smart code
E.g.: CFW500A04P3S2NB20C2).
P0204 = 5 for 60 Hz.
P0204 = 6 for 50 Hz.
http://www.automatedpt.com
Description
First edition.
and in the printing of the filter switch.
General review.
Email: charles@automatedpt.com
Chapter
-
-
-
-
-
-
Email: charles@automatedpt.com