Publicidad
Idiomas disponibles
Idiomas disponibles
•
The wood chipper is designed to be transported via a van or small trailer. The machine is
equipped with grab bars that are to be used for both lifting the machine and strapping it down.
This machine weighs approximately 700kg and should only be lifted using correct apparatus.
•
When the wood chipper is packaged in the plywood case, we can carry machine by forklift.
•
Without package, we can lift the machine at the point of lift label shown.
•
Tie the machine at the point of tying label when transport for long distance to keep the
machine stable.
A - Lifting attachment point
B - Attachment point
Note: The machine is not designed to travel on the road, it's only permitted to move for short
distance by its wheels.
Stablishing the chipper
•
Stabilize the chipper on hard level ground
Use the wedges on both side of wheels.
•
Delivery
All machines have a full pre-delivery inspection before leaving the factory and are ready to use. Read
and understand this instruction manual before attempting to operate the chipper. In particular, read
pages which contain important health and safety information and advice.
Operator's personal protective equipment required
Publicidad
