Publicidad
Idiomas disponibles
Idiomas disponibles
Check for loose electrical wiring.
Replace hydraulic oil filter - every
year or 100 hours after service or
repair work to the hydraulic system.
Replace hydraulic oil.
Replace fuel pipes and clamp bands.
Check spark plugs.
Change engine oil.
Replace engine oil filter cartridge.
Check valve clearance.
Replace anvils when worn.
Axle maintenance.
Tow head maintenance.
In conditions of 'heavy usage' - i.e. in excess of 500 hours per year - it is recommended that the
bearings are changed annually to ensure that the machine retains optimum working performance.
Safe maintenance
Always immobilise the engine before undertaking any maintenance work on the chipper by removing
the key and disconnecting the battery.
•
Handle blades with extreme caution to avoid injury. Gloves should always be worn when
handling the cutter blades.
THE drive belts should be connected while changing blades, as this will restrict sudden
•
movement of the rotor.
The major components of this machine are heavy. Lifting equipment must be used for
•
disassembly.
•
Clean machines are safer and easier to service.
Avoid contact with hydraulic oil.
•
Safe lifting of the chipper
The lifting eye is designed to lift the machine's weight only. Do not use hoist hook directly on the
lifting eye, use a correctly rated safety shackle. Inspect the lifting eye prior to each use - do not use
lifting eye if damaged.
DEPENDING ON ENGINE
RETURN TO DEALER FOR ANVIL CHANGE
REFER TO SUPPLIERS INSTRUCTION SHEET
OR
OR
Publicidad
