Parkside PPMA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 21

Wear eye protection
Wear breathing protection
Wear ear protection
Do not expose the unit to rain.
Electrical machines do not belong
with domestic waste
This device is part of the
X 20 V TEAM series.
Graphical symbols on the polishing
pads:
Hand wash
Do not bleach
Not suitable for tumble drying
Do not iron
Do not clean with chemicals
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage
Precaution symbol with information
on prevention of harm / damage
Notice symbol with information on
how to handle the device properly
General Safety Directions for
Power Tools
WARnInG! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETy
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETy
a) Power tool plugs must match
the outlet. never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fied plugs and matching outlets will
reduce risk of electric shock.
GB MT
21