Ingun MA 2 Serie Manual Del Usuario página 34

2.2) Additional functional unit - automatic opener/closer
Using the additional functional unit, the automatic opener/closer, the manual test fixture can be
upgraded to a fully automatic test fixture.
Additional functional unit - automatic opener/closer
2.3) Product description
An identification label is applied to the test fixture and the exchangeable kit. A CE label is affixed
only if the test fixture and the exchangeable kit are to be treated in the above configuration accord-
ing to an applicable EU Directive.
WARNING L
ETHAL ELECTRIC SHOCK
Hazardous electrical voltage at the test probes for > 25 VAC voltage and > 60 VDC voltage!
Exchangeable kits must not be used in the test fixture if the kit's identification label

specifies a higher voltage than that stated on the identification label on the test fixture.
1 Product group
ID
CODE
MA. . . . . . . . . . Manual test fixture
2 Generation
ID
CODE
2 . . . . . . . . . . . MA with 14 mm stroke
33
!
Text fixture identification label
D
EVICE
D
EVICE VERSION
©
INGUN: Subject to technical changes without notice. E&OE.
1) Functional unit -
automatic opener/closer
(FB-OSA-E-MAxxxx)
consists of:
a) Drive unit with gear
wheel
b) Side coupler with gear
segment
c) Cover
d) Latch
e) Open/closed sensor
2) Functional unit
Safety switch
(FB-SIS-SOA-MAxxxx)
f) Switch strip
g) Safety switch
h) Shock-proof protection
i) Switch for mounting
plate
English