Ingun MA 2 Serie Manual Del Usuario página 43

English
6.3) Opening the test fixture(debugging)
1) Bring the locking bolt into the locking
position by turning it. If necessary, move
the drive unit's handle slightly until the
locking bolt clicks into place and locks the
drive unit.
3) Open the test fixture using the handle.
CAUTION R
ISK OF INJURY BY CRUSHING OR SHEARING
Risk of injury from mechanical moving parts for options with pneumatic or electrical drive sys-
tems!
Before opening the test fixture (debugging), be sure to move the locking bolt into the

locking position! This mechanically fixes the drive unit in the closed position and blocks any
movement of the pneumatic or electric drives such as the self-opening unit.
©
INGUN: Subject to technical changes without notice. E&OE.
2) Use cross-head screwdriver to loosen the
quick-release screw.
4) Lift until the telescopic cover strut clicks
into place.
!
42