Publicidad
Idiomas disponibles
Idiomas disponibles
•
Ensure that the equipment is completely depressurized.
•
Store the equipment in a dry, well-ventilated area. Use additional preservatives on the external steel
parts.
8.6.2
Petrol engine (IPU-M 2035 PRU)
For long-term storage, carry out the same actions as for temporary storage (Refer to chapter 6.4.3) as
well as the following additional activities.
•
Replace the engine oil. Refer to chapter 4.4.2.
•
Remove the spark plug. Drip a tablespoonful of engine oil in the cylinder. Pull on the pulling cord to
make the engine turn a few times, so the oil is well distributed. Reinstall the spark plug.
•
Pull on the pulling cord until you feel resistance. Now the piston is in the position for coming up for
its compression stroke, and the intake valve and exhaust stem valve are closed. Storing the pump in
this condition prevents corrosion.
9
Decommissioning/Recycling
At the end of its service life the equipment can be scrapped and recycled.
•
Make sure that the equipment is put out of order to avoid any use.
•
Check that the equipment does not contain any pressurized components.
•
Recycle the various materials used in the equipment such as steel, aluminium, NBR (Nitrile
Butadiene Rubber) and plastic.
•
Collect all dangerous substances separately and dispose of them in an environmentally responsible
way.
•
Consult the Holmatro dealer about recycling.
IPU-M
916.219.173_005
EN
45
Publicidad
