Senco F-15XP Instrucciones De Empleo página 8

EN
WARNING
Read and understand tool labels and manual. Failure to follow warnings will result in DEATH or SERIOUS INJURY.
Operators and others in work area MUST wear safety glasses with side shields.
Keep fingers AWAY from trigger when not driving fasteners, to avoid accidental firing.
Choice of triggering method is important. See page 12 for triggering options.
Never point tool at yourself or others in work area.
Always point the tool away when connecting battery.
Do not alter or remove trigger or safety.
Tools shall not be modified without written approval of the manufacturer.
Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control.
Battery Use
Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to
persons.
To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
Tool Use
CHARGER
VB0157 EU
VB0158 AU
VB0159 UK
Battery VB0213
Rated Capacity 2.0Ahr
Chemistry Li-Ion
Number of Cells 5
Voltage 18V
SAFETY WARNINGS
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for SENCO
battery chargers.
Before using a SENCO battery charger, read all instructions and cautionary
markings on battery charger and battery.
Do not expose charger to water, rain, or snow.
Use indoors.
8