IPC Yanmar 1450 D Manual De Instrucciones página 48

5.4.4. The battery charger
Never allow the batteries to become excessively flat as this could damage them
5.4.5. Choosing the battery charger
Make sure the battery charger is compatible with the batteries to be charged:
− tubular lead batteries: an automatic charger is recommended
− Consult the battery charger manufacturer and manual to confirm the choice.
− gel batteries: use a charger specific for this type of battery.
5.4.6. Preparing the battery charger
If you wish to use a battery charger not provided with the machine, you must fit it with the
connector supplied with the machine.
To install the connector, proceed as follows:
•
remove about 13 mm of protective sheath from the red and black wires of the
battery charger;
•
insert the wires into the connector contacts and squeeze them forcefully with
suitable pliers;
•
respect the polarity (red wire + black wire –) when inserting the wires into the
connector.
•
Insert the wired-up connector into the connector on the machine.
5.5. Lifting and transporting the machine
All phases must be performed in an adequately lit room and adopting the safety
The operator must always use personal protection devices.
To load the machine onto a means of transport, proceed as follows:
•
empty the debris bin
•
place the machine on the pallet and fix it with plastic straps or metal brackets;
•
lift the pallet (with the machine) using a fork lift truck and load it onto the means of
transport;
•
anchor the machine to the means of transport with cables connected to the pallet
and machine itself.
6.
6.1. Controls - Description
With reference to fig. C, the machine has the following controls and indicator lights:
ON/OFF switch (PETROL and DIESEL version) (fig. C, ref. 1): turns the machine on
and off
ON/OFF switch (BATTERY version) (fig. C, ref. 1) turns the machine drive pump on and
off
Horn button (fig. C, ref. 2)
Suction fan switch (fig. C, ref. 3): turns the suction motor on and off
Centre brush switch (fig. C, ref. 4): turns the brushes on and off.
Filter shaker button (fig. C, ref. 5): operates the filter shaker
Light switch (fig. C, ref. 6): turns the headlights on and off (OPTIONAL)
Debris bin rotation button (fig. C, ref. 7): enables rotation of the debris bin
IMPORTANT
irreparably.
IMPORTANT
measures most appropriate to the situation.
PRACTICAL GUIDE FOR THE OPERATOR
ENGLISH
9