Descargar Imprimir esta página

IPC Yanmar 1450 D Manual De Instrucciones página 58

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 104
Debris bin raising/lowering
not functioning
Side brushes not turning
Side brushes do not lower
Side brushes do not rise
Headlights do not come on
Flashing
light
functioning
The machine raises dust
The machine leaves dirt on
the ground
Drive
pump
motor
working
(BATTERY
version)
Functions pump motor not
working
(BATTERY
version)
The debris bin has not returned to
the correct position, but is still tipped
up or microswitch malfunction
Debris bin tipping/raising enabling
button not pressed
The centre brush switch is pressed
Raising/lowering
malfunction
Fuses blown
Side brushes button not pressed
Centre brush switch not pressed
Side brush rotation solenoid valve
malfunction
Fuses blown
Side brushes button not pressed
Centre brush switch not pressed
Brushes raising/lowering actuator
malfunction
Actuator microswitches incorrectly
adjusted
Side brushes button pressed
Centre brush switch pressed
Actuator microswitches incorrectly
adjusted
Fuses blown
Bulbs blown
Lights relay malfunction
Fuses blown
not
Bulbs blown
Filter clogged
Filter damaged
Filter incorrectly installed
Filter housing gasket damaged
Centre brush not adjusted or worn
The centre brush has picked up wire
or string
The flaps are damaged
Bin full
not
Battery flat
Fuses blown
Battery flat
Fuses blown
Adjust or replace the microswitch
Press the debris bin tipping/raising
enabling button
Turn the centre brush switch off
solenoid
valves
Replace the solenoid valves
Control/replace fuses
Press the side brushes button
Press the centre brush switch
Replace the solenoid valve
Control/replace fuses
Press the side brushes button
Press the centre brush switch
Replace actuator
Adjust microswitches
Release the side brushes button
Release the centre brush switch
Adjust microswitches
Control/replace fuses
Replace the burned bulb
Replace relay
Control/replace fuses
Replace the burned bulb
Shake the filter using the filter
shaker. If necessary, extract and
clean thoroughly
Replace the filter
Install the filter correctly
Replace gasket
Adjust or replace the centre brush
Remove the wire or string
Replace flaps
Empty the debris bin
Recharge the battery
Check/replace fuses
Recharge the battery
Check/replace fuses
ENGLISH
19

Publicidad

loading

Este manual también es adecuado para:

121285