Descargar Imprimir esta página

Kärcher ESB 28 Manual De Instrucciones página 10

Ocultar thumbs Ver también para ESB 28:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Turn the electrical suction brush and re-
move the housing lid.
Dismantle the brush roller.
Pull out the roller bearing and clean it.
Insert the roller bearing.
Assemble the brush roller. Ensure that
the gears of the toothed belt match with
the cogs.
Replace the housing lid.
Replace the hood and press it evenly
until it locks in.
Troubleshooting
The mechanism for protection against over-
heating switched off the motor when it is
overloaded, for e.g. because the brush roll-
er is blocked.
Pull out the mains plug.
Check the brush roller for impurities and
remove any objects that may be block-
ing its movement.
Allow device to cool down.
Wait for approx. 2 minutes before restarting
the appliance.
10
English
Specifications
Voltage
220-240 V, 50/60 Hz
Protective class II
Output of the
30 W
brush motor
Sweeping width 240 mm
Brush roller
replaceable
Brush drive
Toothed belt with elec-
tronic protection against
overloading
Height
60 mm
Depth
120 mm
Width
280 mm
Weight
~ 1 kg

Publicidad

loading