Kärcher ESB 28 Manual De Instrucciones página 8

Start up
– The Kärcher dry vacuum cleaner is the
basic vacuum cleaner that is to be used.
– ESB 28 is used for cleaning carpeted
floors.
– The rotating brush in ESB 28 loosens
the dirt in the carpet in a much better
way than traditional vacuum cleaners.
This brings about a more intensive
cleaning effect.
Scope of delivery
1 Electrical suction hose
2 Suction head with brush
3 Telescopic suction pipe
4 Cover
5 Safety ring
Assembly
Insert the telescopic suction pipe in the
suction head intake.
Note
The safety pin must get locked into the
hole.
8
English
Insert the plug of the suction head into
the socket at the telescopic suction
pipe.
Insert the manifold of the electrical suc-
tion hose into the telescopic suction
pipe and turn until the safety pin locks
into the hole.
Insert the fast-on connection of the tele-
scopic suction pipe into the socket at
the manifold of the electrical suction
hose.
Only for vaccum cleaner T201: Replace
the yellow safety ring at the suction con-
nection of the vacuum cleaner with the
enclosed black safety ring (item 5).
Push the cover (item 4) over the suction
connection.
Insert the electrical suction hose into the
suction connection of the vacuum
cleaner.
Only for vaccum cleaner T201: Push the
cover on the safety ring and secure the
electronic suction hose. Check and en-
sure proper fitting of the electronic suc-
tion hose.