Peg-Perego ypsi Instrucciones De Uso página 24

keep away from cigarettes. The
rain canopy must not be used on a
stroller without a hood or parasol it
can attach to. Use the rain canopy
only under adult supervision. Check
the rain canopy does not interfere
with any moving mechanism in the
chassis or stroller. Remove the rain
canopy before folding the chassis or
stroller.
"Intended use: YPSI is designed for
children with special needs (GMFCS
level I to V, up 30 kg in weight), who
need a foldable, easy-to-manage
stroller for travelling short distances."
Declaration of conformity: This
product complies with the
requirements of Regulation (EU)
2017/745 on medical devices. If
the product is modified, used in
combination with another product
made by another manufacturer or
used with non-original accessories
or replacement parts, the CE
marking must be removed.
The images referring to the textile details may
differ from the collection purchased.
INSTRUCTIONS
YPSI CHASSIS
1 OPENING: Before opening the frame, if present,
remove (without using blades) all die-cut cardboard.
WARNING:
_ DO NOT PULL OR FORCE THE FASTENER BEYOND ITS
LIMIT.
_ DO NOT USE THE FASTENER AS A HANDLE BAR FOR
TRANSPORT OR TO CARRY WEIGHTS.
DO NOT HANG BAGS OR OTHER ACCESSORIES ON
THIS ELEMENT.
Press the side fastener downwards, grip the upper
ends of the handle bar and rotate them towards
you until the chassis has opened completely (fig_a).
Opened chassis (fig_b). The chassis is opened
correctly when you hear a click, which corresponds
to the handle bar frame attaching - please look at the
picture.
2 FITTING THE WHEELS: slot the rear wheel crosspiece
onto the uprights (fig_a), ensuring that it is facing the
right way, then attach the rear wheels until they click
into place (fig_b) . To assemble the front wheels, fit
them into the slots until they lock into place (fig_c).
3 FITTING THE HANDLE BAR: insert the handlebar into
the frame (fig_a) as shown in the picture. For the
attachment to be complete, press the two buttons
on the side of the handle bar (fig_b) and press the
handle bar until you hear it click (fig_c).
4 BASKET ASSEMBLY: Slip the basket flap into the slot
along the front bar of the chassis (Fig_a).
Fasten the basket eyelets to the buttons on each side
All manuals and user guides at all-guidesbox.com
5 To complete the basket attachment procedure for the
6 Slip the back section of the pouch under the bar
7 Close the pouch zip (fig_g).
8 The section of the front basket can be lowered (fig_a)
9 FIXED OR SWIVELLING FRONT WHEELS: to lock the
10 BRAKE: press the lever down to apply the brake and
11 ADJUSTABLE HANDLE BAR: to adjust the height of
12 FOLDING: lock the front wheels into fixed position
13 To fold correctly, make sure the side hook is engaged
14 All the wheels can be removed to reduce dimensions
15 Ypsi Chassis, has the information on the product's
_ Product name, production date and serial number of
1 OPENING: Before opening the Ypsi Seat, remove
2 ATTACHING THE SEAT ONTO THE CHASSIS: To fasten
3 The Ypsi Seat can be attached onto the chassis in
- 24 -
of the frame (fig_b).
front part, you are required to insert the supplied tie
(fig_1) as follows:
position it between the basket and buttons, as shown
(fig_2) and use your finger to push downwards, so as
to complete the attachment procedure (fig_3).
Repeat the same procedure for the other side of the
basket.
(fig_d).
Fasten the three buttons at the base of the chassis
(Fig_e).
Fasten the Velcro strap in the inside of the basket,
positioning the fabric as shown in the picture (Fig_f).
Finally, to complete basket attachment, fasten the
basket buttons on both sides onto the chassis (fig_h).
WARNING! If you do not hook the basket on correctly,
as shown, the basket will be unable to support the
weight of loads placed in it.
or raised (fig_b).
front wheels, rotate the lever anticlockwise onto the
locked padlock (fig_a), to release the wheels - turn
the lever clockwise to the unlocked padlock (fig_b).
On difficult terrain, we recommend using fixed
wheels.
lock the frame. Do the opposite to release the brake.
the handlebar, pull the levers towards you (fig_a) and
move the handle bar until it clicks (fig_b). The handle
bar can be adjusted in several positions.
(fig_a), put the handle bar to its lowest position
(fig b). Rotate the safety lever to the left (fig_c) and
pull the frame's internal handle towards you (fig_d).
Lift the handle until the frame is completely folded
(fig_e).
(fig_a). When folded, the chassis will stand upright
(fig_b).
TRANSPORT: the stroller can be conveniently carried
(with the front wheels in fixed position) using the
central handle bar (fig_c).
further. To remove the back wheels: pull the lever
downwards and remove the wheel as illustrated
(fig_a). To remove the front wheels: press the tab as
shown and remove the wheels (fig_b).
SERIAL NUMBERS
production date on the lower part of the frame.
the chassis. This information is essential in the event
of a claim.
INSTRUCTIONS
YPSI SEAT
(without using blades) any die-cut cardboard.
Open the seat from the ends, pulling until it clicks.
the Ypsi Seat, position it on the chassis (fig_a) and
press down with both hands until it clicks (fig_b).
Ensure the Ypsi Seat is properly attached.
"world-facing" (fig_a) or "mum-facing" position
(fig_b).
Always engage the brake on the chassis before