Publicidad
Idiomas disponibles
Idiomas disponibles
•
Remove all unburned pellets and ash from inside
and around the firepot. (See instructions for proper
handling and disposal of ash on page 23.)
•
Before replacing the heat baffle, drip tray, and the
grill grates, plug the power cord into an appropriate
grounded/earthed electrical outlet and turn the switch
ON (I). Pellets should fall into the firepot and the hot
rod should begin to heat (it will start to turn red).
Do not touch the hot rod.
CAUTION
w
•
When flames start to come out of the firepot, turn the
switch OFF (O). Let the grill cool down. Now you're
ready to place the heat baffle, grease drip tray, grill
grates, and food back into the grill.
SAVE THESE INSTRUCTIONS
12"
18"
(30.5 cm)
(45.7 cm)
5
18"
(45.7 cm)
TRAEGERGRILLS.COM
Publicidad
