Publicidad
Idiomas disponibles
Idiomas disponibles
No pan or improper size
If no pan is placed on the selected element, or if it is
made of unsuitable material or is not the correct size,
the power level displayed on the element indicator will
flash. Place a suitable pan on the element to stop the
flashing. If you take longer than 90 seconds to place a
suitable pan on the element, it will automatically turn
off.
Empty pans or pans with a thin base
Do not heat up empty pans, or use pans with a thin
base. The cooktop is equipped with an internal safety
system. However, an empty pan may heat up so quickly
that the "automatic switch off" function may not have
time to react and the pan may reach very high
temperatures. The pan base could melt and damage
the cooktop glass. In this case, do not touch the pan
and switch the cooktop off. If the cooktop fails to work
after it has cooled down, please contact the technical
service.
Pan detection
Each element has a minimum limit for detecting pans,
which varies depending on the material of the pan you
are using. You should therefore use the element that
best matches the diameter of your pan.
11
Publicidad
