Fronius MHP 280i G CMT Manual De Instrucciones página 42

JobMaster func-
tion
Deactivating the
The torch triggers on both sides are enabled as standard. If one side needs to be
left or right deactivated, proceed as follows:
torch trigger
Deactivating the left torch trigger
1
Deactivating the right torch trigger
1
Deactivating the left and right torch triggers
1
Activating the left and right torch triggers
1
42
Simultaneously press the "-" button on the left side and the "+" button on the
right side. Hold for five seconds
Simultaneously press the "-" button on the right side and the "+" button on
the left side. Hold for five seconds
Simultaneously press the "-" button on the right side and the "-" button on
the left side. Hold for five seconds
Simultaneously press the "+" button on the right side and the "+" button on
the left side. Hold for five seconds
The JobMaster welding torch has the
following functions:
- The desired welding parameter on
the power source can be selected
using the arrow buttons
- The parameter can be changed
using the +/- buttons
-
The display shows the current pa-
rameter and value