Descargar Imprimir esta página

Fronius MHP 280i G CMT Manual De Instrucciones página 43

Ocultar thumbs Ver también para MHP 280i G CMT:

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety
Warning notices
The welding torch is fitted with safety symbols and a rating plate. The rating plate
on the device
and safety symbols must not be removed or painted over. The symbols warn
against operating the equipment incorrectly, as this may result in serious injury
and damage.
Rating plate with safety symbols
Do not use the functions described here until you have fully read and understood
the following documents:
-
-
-
Welding is dangerous. The following basic requirements must be met to ensure
the equipment is used properly:
-
-
-
These Operating Instructions
The enclosed "Safety rules" document
All the Operating Instructions for the system components, especially the
safety rules
Welders must be sufficiently qualified
Suitable protective equipment must be used
All persons not involved must be kept at a safe distance from the welding
torch and the welding process
Warning of moving parts
43

Publicidad

loading

Este manual también es adecuado para:

Mhp 400i w cmt