Descargar Imprimir esta página

Siemens SITRANS FCT030 Instrucciones De Manejo página 13

Ocultar thumbs Ver también para SITRANS FCT030:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Table 5-5
Navigation view
Key
Function
Enter the next higher level of the navigation view (for example from level 2 to level 1).
If located on level 1 in the navigation view then enter the operation view
Select the item above in the list; keep pressing the key to accelerate scrolling up the selection list. If the
key is pressed when the top item is selected, the bottom item will be highlighted
Select the item below in the list; keep pressing the key to accelerate scrolling down the selection list. If the
key is pressed when the bottom item is selected, the top item will be highlighted
Enter the next lower level of the navigation view (for example from level 1 to level 2).
If a parameter is selected in the navigation view then enter the parameter view
Editing the parameters
When this symbol
is shown in the graphics, the four buttons on the LUI are used for changing the parameters as
described below.
Table 5-6
Parameter edit view
Key
Function
Select the next left position.
If the most left position is selected, exit the parameter edit view without confirming the changes. Keep
pressing the key to jump to the most left position
Change the selected number/character.
Numeric characters: increase the number by one (for example from 7 to 8)
ASCII characters: select the previous character in the alphabet
Change the selected number/character.
Numeric characters: decrease the number by one (for example from 8 to 7)
ASCII characters: select the next character in the alphabet
Select the next right position.
If most right position is selected, confirm the change and exit the parameter edit view. Keep pressing the
key to jump to the most right position
Table 5-7
Parameter read only view
Key
Function
Exit parameter edit view
No functionality
No functionality
No functionality
In the following table the menus are entered in bold text and the parameters in
Quick start
The menu items 1.1 through 1.11 make up a quick start guide.
In the following table only the menus and parameters of the first two levels of the LUI menus structure are listed.
SITRANS FCT030 transmitter
A5E03650800-02, 03/2012
italic
.
13

Publicidad

loading