Publicidad
Idiomas disponibles
Idiomas disponibles
Operating instructions SATAjet 3000 B HVLP (DIGITAL)
4.6 Round/fl at spray control
Round/flat spray control for right-handed painters
for infinitely variable adaptation of the spray fan to the object:
Turn to the left - flat spray
Turn to the right - round spray
4.7 Nozzle set
Complete, hand-checked nozzle-set, consisting of paint needle (V4A), paint
nozzle (V4A) and air cap. Mount the nozzle set tightly (use universal wrench
for the paint nozzle). Insert paint nozzle before putting in paint needle. The
air cap should be placed in a position in which the marking is on top. Use
punched hexagon socket (wrench size 12) of universal wrench for paint
nozzle. Only original SATA parts guarantee highest quality and lifetime.
When mounting foreign parts, quality reduction is possible and the SATA
warranty expires.
Nozzle sets
132993 for SATAjet 3000 B HVLP WSB 132951
132910 for SATAjet 3000 B HVLP 1,0
132928 for SATAjet 3000 B HVLP 1,2
132936 for SATAjet 3000 B HVLP 1,3
4.8 Spray distance
In order to avoid overspray and surface problems, we recommend a spray
distance of 5 - 7 (8*) inches on 29 psi between air cap and object should be
maintained in accordance with the chart below, depending on spray gun type
and material.
4.9 Internal nozzle pressure
At an entrance pressure of more than 29 psi at the air inlet, the internal nozzle pressure exceeds
10 psi. The maximum inlet pressure permitted for HVLP use is stamped onto the gun body. For
pressure above 2.0 bars the SATAjet 3000 HVLP gun is compliant to U.K. legislation.
(Lombardia* (Italy): air inlet pressure below 2.5 bar / 36 psi - air cap pressure below 1.0 bar / 15 psi)
136341 Test air cap for nozzle size 1,0; 1,2; 1,3; 1,4; 1,5 cpl.
5. Changing the self-adjusting Seals
a) Material Side: For replacement of the self-adjusting paint needle packing the paint needle
must be removed. Insert SATA hexagon key size 4 with its cylindrical connection (Tool kit part
no. 9050) into the gun instead of the paint needle, and unscrew the packing screw from the
gun, together with compression spring and packing. Push the items, which are part of the paint
needle packing (part no. 15438: compression screw, compression spring and new packing)
onto cylindrical connection of the hollow key, and screw them tight inside the gun body. Check
paint needle for damage and reassemble.
132944
for SATAjet 3000 B HVLP 1,4
for SATAjet 3000 B HVLP 1,5
132969
for SATAjet 3000 B HVLP 1,7
132977
for SATAjet 3000 B HVLP 1,9
132985
for SATAjet 3000 B HVLP 2,2
IX.5
Publicidad
