Caberg FULL FACE AVALON X Manual Del Usuario página 6

ENG
CLEANING THE WASHABLE LINING
• Wash it strictly by hand with neutral soap and water (max.30°C).
• Rinse it in cold water, do not wring it. Dry it at room temperature.
WARNINGS! Never clean the lining in the washing machine.
Never use petrol or other solvents to clean the lining.
6. HOW TO INSTALL THE ANTIFOG LENS
6.1 Remove the clear visor as indicated in the instruction above.
6.2 Slightly flex the visor and place the antifog lens between the two pins
provided in the helmet shield. The silicon seal on the antifog lens
must make full contact with the helmet visor in order to avoid any
condensation forming between the helmet visor and the antifog lens.
6.3 Remove the protective film from the antifog lens.
6.4 Fit the helmet visor back on the helmet.
7. HOW TO REMOVE THE ANTIFOG LENS
7.1 Remove the clear visor as indicated in the instruction above
7.2 Flex the helmet visor carefully until there is no more tension on the
antifog lens. Carefully remove the antifog lens from its position.
10