Publicidad
Idiomas disponibles
Idiomas disponibles
6 Electrical connection
Depending on the configured status display, the functions below are signaled.
The priority of the signaling has the output 1 (OUT1).
Status display according to NE107
Green,
Blue,
Yellow,
Red,
Red,
Status display according to IO-Link
Green,
Green,
Green,
Yellow,
Red,
a
1 = 900 ms lit up, 0 = 100 ms off
WARNING!
Risk of injury and material damage due to faulty system states
When filling the container, the tank, or the pipe, uncontrolled system states may be triggered and result
in injuries and material damage.
The plant must be in an error-free state.
Check that the output signal is functioning as intended.
24
lit up continuously
lit up continuously
lit up continuously
flashing
lit up continuously
lit up continuously
flashing 10111011101110
flashing 0101010001010
lit up continuously
lit up continuously
Description
Supply and operation, device is ready for operation
Maintenance required, e.g. clean PEEK tip
Device is covered by liquid
Outside the specification or functional check, error can be
remedied, e.g. temperature range exceeded or incorrect wir-
ing
Malfunction and/or device failure, error cannot be remedied,
e.g. electronic damage
Description
Device is ready for operation, SIO mode
a
Active communication
a
Device search (identification of the device)
Device is covered by liquid, output 1 switched
Malfunction and/or device failure
Publicidad
