Publicidad
Idiomas disponibles
Idiomas disponibles
10
Maintenance and cleaning
The device is maintenance-free.
When pressure testing the container or the pipe, adhere to the admissible limit values.
chapter 4 "Technical data", Page 12
Requirements:
•
The system has been de-energized and secured against being switched on again.
Procedure:
Cleaning of the part in contact with the medium may only be carried out when it is installed (e.g. CIP –
Cleaning in Place or SIP – Sterilization in Place).
Observe the technical data with regard to temperature and pressure specifications.
chapter 4 "Technical data", Page 12
NOTICE!
Damage to the device resulting from improper cleaning.
Damp cloths or compressed air (< 6 bar) are admissible for cleaning.
Do not use any sharp or hard objects (e. g. wire brushes) for cleaning.
Use a suitable cleaning agent that does not affect the materials (chemically and mechanically).
Avoid humidity in the electrical connection.
10 Maintenance and cleaning
43
Publicidad
