Publicidad
Idiomas disponibles
Idiomas disponibles
7
Installation
7 Installation
7.1
Functions
The device can be individually configured with an IO-Link master. As a matter of principle, the interface
enables direct access to process and diagnosis data. Parameterization can be performed during the on-
going process. The new or modified configurations are only adopted once data has successfully been
transmitted.
WARNING!
Risk of injury and material damage due to faulty system states
Injuries and material damage may occur due to system states that have been triggered in an uncon-
trolled manner.
The system must be in an error-free state.
The IODD file can be found under
https://ioddfinder.io-link.com/
by searching for the manufacturer, article number, device type, or device ID.
Alternatively, you can search on the website of the manufacturer
digit product group number, and navigating to the product page with dowonload area.
chapter 3.3 "Nameplate", Page 10
7.1.1
Structure of the operating menu
The menu structure is provided according to VDMA 24574-1 and supplemented with JUMO-specific
menu items.
7.1.2
Preparation and structure of IO-Link communication
Requirements:
•
The software (for example, IO-Link Device Tool) of the IO-Link master is installed on the computer.
Procedure:
1. Connect the device with the IO-Link master (see accessories) via the M12 connector.
2. Connect the IO-Link master for laboratory operation with the computer via the USB interface.
3. Import the IODD file.
chapter 7.1 "Functions", Page 28
4. Connect the sensor.
chapter 5 "Mounting", Page 19
5. Establish the connection via the software.
chapter 7.1 "Functions", Page 28
28
https://en.jumo.de
by entering the 4-
Publicidad
