Vision Fitness ELLIPTICAL ERGOMETER S60 Manual Del Usuario página 7

• Assemble DUAL ACTION ARM (7) on the ROTATION HOUSING (6) by 4 BOLTS (M) and
4 LOCK WASHER (N), then fasten by 5MM T-SHAPED WRENCH.
5
• Line up the rotation housing cover over the rotation housing and push to snap in place.
• Slide the LINK ARM (8) between the flanges of the dual-action arm bracket. Insert
a SOCKET HEAD BOLT (L) through the hole to connect the brackets. Secure with a
NYLON NUT (Q). Tighten with the 10MM WRENCH and 5MM L-SHAPED WRENCH.
• Set the dual-action cover in place over the connection bracket. Place the NUT (P) into
the recess on the inside cover. Insert a BOLT (O) through the outside hole and tighten
to the nut with a screwdriver.
• Repeat these steps on the right side.
• Attach PROTECTION FOAM (9) (optional parts for different modalities and
market region).
GREEN BAG
Description
L M8x50L Socket Head Bolt
M M6x20L Socket Head Bolt
N M6 Lock Washer
O M5x50L Phillips Head Bolt
P M5 Hex Nut
Q M8 Nylon Nut
6
Qty
23.6N.m/ 17.5 ft-Ib 2
8
8
2
2
2
9
7
6
N
M
P
Q
L
8
• Fasten BRACKET COVER (10) to CONSOLE MAST (2) by 2 BOLTS (R).
• Set the right side ARM COVER (11) into connection arm and fasten by 4 BOLTS (S).
6
Then repeat the steps on the left side.
BLACK BAG
Description
R M5x15L Button Head Bolt
S M5x25L Phillips Head Bolt
11
O
Qty
2
8
2
10
R
S