Publicidad
Idiomas disponibles
Idiomas disponibles
EP 14PTS-HR20
Fig. 19 Hose size
Fig. 20 Position of reversing knob
Position of reversing knob when used by right-handed
Fig. 21 Reporting, RE – signal
Air
pressure
Start pulsing
ERGONIP 10
RE–signal
Air shut off
Atlas Copco Tools - No. 9836 1621 00
5 m PVC 10
ERGOQIC 08
8202 1180 31
Position of reversing knob when used by left-handed
This RE-machine supplies an air pressure signal which can be
connected to a control unit to count the number of tightenings and to
detect premature shut offs, rehits and other improper tightenings.
The RE-signal is received by using the nipple, hose (4/2) and
connector, (Ref. Number 304, 306 and 307), see fig. 4 to the sensor
of the control unit.
Time
Technical Instructions
ERGONIP 08
Male 3/8" BSP
31
Publicidad
