Publicidad
Idiomas disponibles
Idiomas disponibles
MN003596A01-AB
Chapter 4 : Charging the Batteries
For more information, see
Guidelines on page 7
The red LED on the SUC illuminates to indicate that the battery is charging.
4.3
Charging the Radio and the Battery Using a DLR 12-Pocket
Multi-Unit Charger—Optional Accessory
The DLR 12-Pocket Multi-Unit Charger (MUC) allows drop-in charging of up to 12 radios or up to six
radios and six stand-alone batteries. The batteries can be charged with the radios or removed and
placed in the MUC separately. Each of the 12 charging pockets can hold a radio (with or without the
holster) or battery, but not both at the same time.
Procedure:
1 Place the MUC on a flat surface.
2 Insert the power cord plug into the MUC dual pin connector at the bottom of the MUC.
3 Plug the power cord into an AC outlet.
4 Turn off the radio.
5 Insert the radio or the battery into the charging pocket with the radio or the battery facing away
from the contacts.
NOTE:
•
The MUC clones up to two radios (two source radios and two target radios). For more
information, refer to
•
For more information on the MUC operation, refer to the instruction sheets provided with
the MUC. For more information on the parts and their part numbers, refer to
page
75.
18
Charger LED Indication on page 19
Cloning Mode in Multi-Unit Charger on page
and
Operational Safety
63.
Accessories on
Publicidad
