Motorola DLR1020 Guia Del Usuario página 36

MN003596A01-AB
Chapter 9 : Special Radio Call Features
9.2.1
Direct Call Status Indicator
Table 11: Direct Call Status Indicator
Action
Direct Call initiated using
Top button.
Private conversation initi-
ated using PTT button
Private Call notification
Private conversation in
progress
End of private conversa-
tion
9.3
Private Reply and Direct Call Frequently Asked Questions
Table 12: Frequently Asked Questions
Questions
If I change my mind and want to exit the re-
quest for Private Call or I pressed the Top but-
ton by mistake, how do I get out of the "private
queue" status (Radio Top button LED indicator
is blinking orange)?
What happens if two people (for example user
A and C) press their Top button at the same
time to Private Reply or Direct Call User B?
What happens if a person Private Reply or Di-
rect Call User B, but User B does not want to
engage in the Private conversation?
I pressed the Private Reply button but nothing
happened, For example, Top button LED indi-
cator did not start blinking and instead the radio
gives out a busy tone.
5
According to the private user name programmed in Customer Programming Software (CPS).
36
Radio Caller/Recipient
Caller
Caller
Recipient
Caller and Recipient
Caller and Recipient
Descriptions
Long press the Top button. The radio exits the
private queue request and the Top button LED
indicator turns off, returning you to the radio
normal status.
Pressing the Top button only queues the radio
B ID. Therefore, there is no issue if two people
press the Top button at the same time. The
issue occurs when the two people press the
PTT button at the same time to talk privately to
B. Whoever presses the PTT button faster gets
to talk privately to B. The other user hears a
"busy" or rejection tone.
The nature of the radio communication is to
allow instant communication without the option
to decline radio calls. Therefore, if you are con-
cerned about users disrupting group communi-
cations or misusing the Private Reply or Direct
Call features, ensure that these features are
enabled only on authorized radio users.
It can be due to different causes such as the
Top button is disabled or the radio could not
store the radio ID you wanted to reply to. This is
Top Button LED Voice Prompt or
Indicator
Blink Orange "<Name of Direct
Call user>"
Solid Orange "Private TPT"
Solid Orange
Solid Orange "Private TPT"
Off "Private Over"
Tone
5
"Private"