MN003596A01-AB
Chapter 6 : Radio Overview
Number
6
7
8
9
10
11
6.2
Radio Specifications
The radio specification is printed on the back of the radio.
Table 6: Radio Specifications
Model
Frequency
Band
DLR1020
ISM 900 MHz
DLR1060
ISM 900 MHz
22
Description
•
To browse the channels, press the Volume Up or Volume Down
button.
•
To navigate through various menus set in the Customer Programming
Software (CPS), press the Channel/Menu button.
•
To exit, short press the PTT button.
In Advanced Configuration Mode, the Channel/Menu button gives ac-
cess, and allows navigation to set up special features.
Top Button
The radio Top button is defaulted to Private Reply feature.
For more information on programming the Top button to other features,
refer to
Special Radio Call Features on page
Speaker
Antenna
The antenna is non-removable.
Tx/Rx Indicator LED
Indicates whether the radio is on standby, receiving, or transmitting
mode.
Push-to-Talk (PTT) Button
To talk, press the PTT button and wait to hear the Talk Permit Tone
(TPT). The TPT is a quick double beep. Release it to listen.
For more information, refer to
26.
Microphone
Transmit Power
(Watts)
1
1
29.
Transmitting and Receiving Calls on page
Number of
Channels
2
6
Antenna
Non-removable
Non-removable