Kärcher SC 4 Manual Del Usuario página 34

RISK OF ELECTRIC
SHOCK
Electrical Connection
Your equipment comes factory-equipped
with a plug that complies with the new plug
standard and must be connected to an outlet
in accordance with the standard of each
country. Use an exclusive plug in perfect
working order to connect the machine.
Make sure the power supply voltage
indicated on the machine's power cord
label is the same as the voltage of the
outlet to which it will be plugged.
This equipment is equipped with a
3-pin plug. The housing is connected
to the central prong of the plug, which
is connected to the outlet and in direct
contact with the power supply grounding
cord, thus increasing user safety.
Carefully follow the installation instructions,
especially with regard to power supply
voltage and grounding.
Cords and Extension
If an extension cord must be used, make
sure that it meets the specifications for
cable widths and number of cables and
pins, as described in this manual.
Do not attempt to connect the 3-pin plug
to an outlet that does not comply with the
standard of each country.
Only connect the
grounded outlets.
Before connecting the machine to the
power supply, make sure that the on/
off button on the pressure washer is in
off position.
To disconnect the high-pressure washer,
34
Grounding and 3-pin plug
plug to properly
only pull by the plug and never pull the
power cord, to prevent damage.
Remove the plug from the outlet before
performing any maintenance or cleaning
on the high-pressure washer.
Failing to follow these instructions could
result in risk of death, fire or electric shock.
Under no circumstances use an
extension cord that does not allow
for use of the plug's grounding pin.
Do not drag the equipment by the
hose or power cord.
Do not
or thunderstorms.
Remove the plug from the outlet
before performing any maintenance
or cleaning on the product.
Keep all electrical connections
dry and out of contact with water
and/or wet surfaces.
Do not remove the plug's grounding
pin under any circumstances.
Do not use adaptors that bypass
the plug's grounding pin.
Never use an adapter to connect
to a 10a outlet.
Never use T-shaped adapters
or connectors.
work in rain