mspa Soho P-SH069 Manual De Instrucciones página 11

6.6 Turn on the Heater on the spa wired controller, refer to the "Wired Controller Operation" section. Maximum heating temperature is 40°C (104°F).
7. Zipper and Buckle Operation
7.1 Digital Lock Operation
The default password is "000". Follow the steps below to change the password:
● Push the button (a) in the direction of Fig.7.1.(1) to unlock the digital lock.
● Set your preferred password in 3 digits by turning the number wheel (b), see Fig.7.1.(2).
● Insert back the cable (c). The new password is set.
7.1.(1)
(a)
7.2 Square Spa Buckle Lock Operation
Lock the Buckle
● Insert the buckle on the Ground Mat into the Spa cover buckle, until you hear a "Click" sound.
Unlock the Buckle
● Pinch both sides of the locked buckle, and press down the round dot in center in the same time. Press down the center button and release the lock.
7.2
WIRED CONTROLLER OPERATION
7.1.(2)
®
Celsius/Fahrenheit
Toggle Button
Heater Button
Bubble Button
Up Button
®
(b)
Lock
°C
°F
HEATER FILTER
BUBBLE TIMER
UP DOWN
11
7.1.(3)
(c)
®
Unlock
Filter Button
Timer Button
Down Button