Maytag HAVS-1 Guía De Uso Y Cuidado página 6

Using t heControls - Three-Speed Models
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
Mini 1/4 Full
Medium 1/4 - 1/2 Full
Large 1/2 - 3/4 Full
Oversize 3/4 - Full
Note
• Items must circulate freely for best results.
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water for rinsing.
When the Automatic Temperature Control knob is
set to "On," the washer provides the optimal wash
water temperature for cleaning. To save energy, this
washer will regulate wash water temperatures by
mixing hot and cold water to reach the proper water
temperature.
Note
• In wash water temperatures below 60° F,
detergents do not dissolve well or clean well.
White and heavily soiled, color-fast
Hot/Cold
items
Warm/Warm Moderately soiled, colored items
Warm/Cold Moderately soiled, colored items;
most wrinkle-free items
Cold/Cold Brightly colored, lightly soiled
items; washable woolens
These settings feature Automatic
Temperature Control (A.T.C.):
A.T.C. A.T.C.
Warm Warm
Warm Cold
A.T.C.
Cold
Cold
Assures warm water wash
temperature of approximately 95 ° F;
provides optimum cleaning results
Assures cold water wash
temperature of approximately 75 ° F
to properly activate detergent